Rictech Limited

Telephone

03 489 7473 | 027 383 6434

MicroMite Explore-28 module

LATEST MODEL!!!   Version 1D.

This is a fully assembled E28 module.  The module contains a USB interface, and you can program the firmware into the chip at the heart of the module, using just this module itself, and pic32prog ASCII programmer tool.  The MicroMite itself can also be used to update the code in the USB interface chip(should that ever be required), making for one complete, simple, cheap solution.

Designed to be the same size as an Arduino Nano, it is only 38mm x 17mm in size.

DRIVER FILES:
Driver files are available for this module for use under Windows XP, Windows 7 or Windows 8.
You must have SP3 installed on your XP machine.  Unzip the files, and run the driver installation tool exe file.  You can download the ZIP file from our Downloads page.  This driver will not work with versions of Windows earlier then XP, so Win95/Win98/WinMe are NOT supported.  Both 32-bit and 64-bit drivers are included.  This driver may also be used with Windows 7 and Windows 8.  Windows 10 has native support for this USB chip, so no drivers are needed for Windows 10 machines.  Linux should see this module as a USB-serial adaptor, and locate it under /dev.  Usually shows up as /dev/ttyACM0 then you can talk to it using Minicom or similar.


US$35 including airmail(and PayPal fee) to anywhere on the planet.

Built to order with a lead-time of aproximately one week.
site powered by - Turboweb :: Simple Web Manager