Rictech Limited

Telephone

03 489 7473 | 027 383 6434

Downloads Page

Here you can download files for our products and services.

E28 Module Windows driver files

E28 Module Windows driver files

Download this ZIP file, if you want to use the E28 module on a Windows XP, Windows 7 or Windows 8 machine.  Both 32-bit and 64-bit drivers are included.  Find the sub-folder to suit your system from within the ZIP file, and run the driver installation tool.  This will tell you it is installing a 2200 series driver, but this also works with the 1455 chip used as the USB interface on the E28 module.

Linux and Windows 10 have native support for this USB chip, so no driver files are needed on those systems.

E28 Constructors Pack

E28 Constructors Pack

Download this, if you want to make your own E28 modules.  Contains everything you need to build your own modules including gerbers, schematic, layout files and BOM, XP driver, GFXterm and PIC32PROG + GUI etc.  Both versions 1C and 1D are included in this pack.

PIC32 PROG and GUI for Windows

PIC32 PROG and GUI for Windows

This ZIP file contains the pic32prog.exe programmer, and the Windows GUI utility for quick, easy programming of the Micromite series of PIC32 processors.  This utility fully supports the 1455 USB interface chip used on the newer models of Micromite, such as the E28 module and the E100 version 1C PCB.  Hosted here with the permission of Robert Rozee, who co-wrote pic32prog.exe, and wrote the GUI totally.  There is no installation required.  Unzip the files to a folder of your choice, and simply double-click or otherwise run the P32P GUI.exe file.  You might get a message from Bill Gates(Windows) saying Windows has prevented this application from running, but just click MORE INFO, followed by RUN ANYWAY.  Once this has been done, you won't be asked this again next time you run the utility.

The latest version of PIC32PROG.EXE can be downloaded direcly from:
https://github.com/sergev/pic32prog/blob/master/pic32prog.exe?raw=true

The PIC32PROG repositiry can be found here:
https://github.com/sergev/pic32prog

E100 Port Tester MMBASIC code

E100 Port Tester MMBASIC code

Use this BAS file to run the E100 port tester PCB with the LED's.

1455 USB Serial Interface and ICSP Constructors Pack

1455 USB Serial Interface and ICSP Constructors Pack

Download this ZIP file if you want to build you own 1455 interface.  The pack contains the Gerber PCB files, the .lay6 layout file and a viewer application, the BOM, the latest HEX firmware for the 1455 chip and PIC32PROG and Robert Rozee's GUI interface.

YOU WILL NEED A PICKIT2 or PICKIT3 and the Microchip IPE to initially program the 16F1455 chip at the heart of this board.  Once that is done, a Micromite chip can program any new firmware into this unit using BASIC.

site powered by - Turboweb :: Simple Web Manager